What Acculaw does when it Re-Conditions its Machines

1. The machine is completely disassembled in over 80 parts.

2. Each part is chemically cleaned and conditioned in a two part process using the highest grade solvent.

3. The Stop Pad, Universal Bar Pad and Bank Bar Pad are replaced due to depreciation.

4. All parts such as the ribbon feed roller assembly, paper feed roll shaft, numeral bar brace, pawl hold ribbon advance, aprons, platen gear assemblies, motor gear assemblies and various other parts are examined meticulously and replaced if worn.

5. The Platen is reconditioned or replaced if necessary.

6. All electronic components are pneumatically cleaned and solder points are examined and re-soldered if necessary.

7. The disk drive is cleaned and demagnetized if necessary.

8. The machine is reassembled and all mechanical parts are greased and lubricated to original factory specifications.

9. The factory settings are verified and mechanical adjustments are performed as necessary.

10. The ribbons and batteries are replaced with new items.                         

11. Adjustments are performed on all electronic components, including the contact assembly and switches.

12. All motor gears are aligned to specifications and voltage checked for optimum operation.

13. A complete diagnostics is performed to check computer interface (real-time), battery charging operations, electronic operations, and proper disk drive operation is verified.

14. The machine plastic shell/casing is cleaned inside and out and key tops are polished and or replaced.

15. All internal software programs inside the steno machine is updated to the highest version possible by Acculaw.

16. Paper Tray is replaced if cracked or broken.

17. The LCD display is replaced if any blemishes appear as well as any part or accessories on the machine.

18. The steno machine is then shrink wrapped and professionally packed.